Publication of Department of Mechanical Engineering annual year 2015-16

Department of Mechanical Engineering

Book Chapters

1) R. K. Maurya, M. R. Saxena and Nekkanti Akhil, “Experimental Investigation of Cyclic Variation in a Diesel Engine Using Wavelets" In Berretti S., Thampi S.M., Dasgupta S. (Eds.) Intelligent Systems Technologies and Applications, vol. 384, pp. 247-257, Springer 2016.

 

2) R. K. Maurya, M. R. Saxena, "High Efficiency Reactivity Controlled Compression Ignition Engine" Chapter 12 p.p. 313-328, In A.K. Agarwal, S.K. Aggarwal, A.K. Gupta, A. Kushari, and A. Pandey (Eds.) Energy, Combustion & Propulsion: New Perspectives, Athena Academic, UK 2015.

 

Journals

 

1. A. Singh and A. Agrawal, “Investigation of surface residual stress distribution in deformation machining process for aluminum alloy,” J. Mater. Process. Technol., vol. 225, pp. 195–202, 2015.

 

2. A. Mallick, R. Ranjan and R. Das, “Application of Homotopy Perturbation Method and Inverse Prediction of Thermal Parameters for an Annular Fin Subjected to Thermal Load” J. Thermal Stresses, Vol. 39, pp. 298-313, 2016.

 

3. B. K. Billing, J. Singh, P. K. Agnihotri, and N. Singh, “Development of electrochemical sensor for selective recognition of PO43− ions using organic nanoparticles of dipodal receptor in aqueous medium,” Electrochim. Acta, vol. 182, pp. 1112–1117, 2015.

 

4. B. Kundu, R. Das, and K.-S. Lee, “Differential Transform Method for Thermal Analysis of

Exponential Fins under Sensible and Latent Heat Transfer,” Procedia Eng., vol. 127, pp. 287–294,2015.

 

5. G. S. Goindi, S. N. Chavan, D. Mandal, P. Sarkar, and A. D. Jayal, “Investigation of Ionic Liquids as Novel Metalworking Fluids during Minimum Quantity Lubrication Machining of a Plain Carbon Steel,” Procedia CIRP, vol. 26, pp. 341–345, 2015.

 

6. K. Singh and R. Das, “An experimental and multi-objective optimization study of a forced draft cooling tower with different fills,” Energy Convers. Manag., vol. 111, pp. 417–430, 2016.

 

7. K. Singh and R. Das, “A feedback model to predict parameters for controlling the performance of a mechanical draft cooling tower,” Appl. Therm. Eng., 2016.

 

8. K. Singh and R. Das, “Generalized inverse analysis for fins of different profiles with all temperaturedependent parameters,” Heat Mass Transf. und StoffUbertragung, 2015.

 

9. K. Singh, R. Das and B. Kundu, 'Approximate Analytical Method for Porous Stepped Fins with Temperature-Dependent Heat Transfer Parameters', AIAA-J. Thermophys. Heat Transfer, vol. 30, no. 3, pp. 661-672, 2016.

 

10. L. Kumar, V. Mehandia, and S. Narayanan, “Modeling Laminar Pulsatile Flow for Superior Cleaning of Fouling Layers,” Ind. Eng. Chem. Res., vol. 54, no. 43, pp. 10893–10900, 2015. 11. N. Singh, B. K. Billing, J. Singh, and P. K Agnihotri, “Thiourea Based Dipodal Receptor Development for Electrochemical Detection of Br − Ion in an Aqueous Medium” Electroanalysis, vol. 28, no. 4, pp. 718–723, 2015.

 

12. O. Ruzimuradov, K. Sharipov, A. Yarbekov, K. Saidov, M. Hojamberdiev, R. M. Prasad, G.

Cherkashinin, and R. Riedel, “A facile preparation of dual-phase nitrogen-doped TiO 2–SrTiO 3 macroporous monolithic photocatalyst for organic dye photodegradation under visible light,” J. Eur. Ceram. Soc., vol. 35, no. 6, pp. 1815–1821, 2015.

 

13. P. K. Agnihotri and E. Van der Giessen, “On the rate sensitivity in discrete dislocation plasticity,” Mech. Mater., Feb. 2015.

 

14. P. Sarkar and A. Chakrabarti, “Creativity: Generic Definition, Tests, Factors and Methods” The International Journal of Design Sciences and Technology, Europia, vol, 21, no.1, pp. 7-37, 2015.

 

15. R. Das, K. Singh, and T. K. Gogoi, “Estimation of critical dimensions for a trapezoidal-shaped steel fin using hybrid differential evolution algorithm,” Neural Comput. Appl., no. m, pp. 1–11, 2016.

 

16. R. K. Singla, K. Singh, and R. Das, “Tower characteristics correlation and parameter retrieval in wetcooling tower with expanded wire mesh packing,” Appl. Therm. Eng., vol. 96, pp. 240–249, 2016.

 

17. R. K. Maurya and N. Akhil, “Numerical investigation of ethanol fuelled HCCI engine using

stochastic reactor model. Part 1: Development of a new reduced ethanol oxidation mechanism,” Energy Convers. Manag., vol. 118, pp. 44–54, 2016.

 

18. R. Das and D. K. Prasad, “Prediction of porosity and thermal diffusivity in a porous fin using differential evolution algorithm,” Swarm Evol. Comput., vol. 23, pp. 27–39, Aug. 2015.

 

19. S. Saroha, T. Mittal, P. J. Modi, V. Bhalla, V. Khullar, H. Tyagi, R. A. Taylor, and T. P. Otanicar, “Theoretical Analysis and Testing of Nanofluids-Based Solar Photovoltaic/Thermal Hybrid Collector,” J. Heat Transfer, vol. 137, no. 9, p. 91015, 2015.

 

20. S. Soni, H. Tyagi, R. A. Taylor, and A. Kumar, “Experimental and numerical investigation of heat confinement during nanoparticle-assisted thermal therapy,” Int. Commun. Heat Mass Transf., vol. 69, pp. 11–17, 2015.

 

21. S. Soni, H. Tyagi, R. A. Taylor, and A. Kumar, "The Influence of Tumour Blood Perfusion Variability on Thermal Damage During Nanoparticle-Assisted Thermal Therapy”, International Journal of Hyperthermia, Vol. 31, no. 6, pp. 615-625, 2015.

 

22. S. Gupta and E. Singla, “Evolutionary robotics in two decades: A review,” Sadhana - Acad. Proc. Eng. Sci., vol. 40, no. 4, pp. 1169–1184, 2015.

 

23. S. Singh and E. Singla, “Realization of task-based designs involving DH parameters: a modular approach,” Intell. Serv. Robot., 2015.

 

24. S. Gupta, P. Sarkar, and E. Singla, “Understanding different stakeholders of sustainable product and service-based systems using genetic algorithm,” Clean Technol. Environ. Policy, vol. 17, no. 6, pp. 1523–1533, 2015.

 

25. S. Singh and E. Singla, “Service Arms with Unconventional Robotic Parameters for Intricate Workstations : Optimal Number and Dimensional Synthesis,” vol. 2016, 2016.

 

26. Y. L. Hewakuruppu, R. A. Taylor, H. Tyagi, V. Khullar, T. Otanicar, S. Coulombe, and N. Hordy, “Limits of selectivity of direct volumetric solar absorption,” Sol. Energy, vol. 114, pp. 206–216, 2015.

 

Conference Proceedings

1) A. Agrawal, N. V. Reddy, P. M. Dixit, “Optimal Blank Shape Prediction considering Sheet Thickness Variation for Multistage Deep Drawing” in proc. 10th ASME 2015 Manufacturing Science and Engineering Conference, Charlotte, North Carolina, USA, June 08-12, 2015.

 

2) A. R. Patel, P. Sarkar, H. Singh, H. Tyagi, S. Sagi, “Emission discounting method for mitigation of environmental issues” in proc. Fist IEEE Uttar Pradesh Conference-International Conference on Energy Economics and Environment (UPCON-ICEEE 2015), Greater Noida, India, March 27-28, 2015.

 

3) A. Singh , A. Agrawal, “Experimental Investigation on Elastic Spring Back in Deformation

Machining Bending Mode” in proc. 10th ASME 2015 Manufacturing Science and Engineering Conference, Charlotte, North Carolina, USA, June 08-12, 2015.

 

4) B. K. Billing, P. K. Agnihotri, N. Singh, “Development of dipodal electrochemical sensor for selective recognition of PO43- using organic nanoparticles in an aqueous medium” in proc. Prof. R.C. Paul national symposium, Punjab University, Chandigarh, India, March 20-21, 2015.

 

5) E. Singla, S.Singh and R. Kuruvilla, "Path-based Optimal Design Strategy for Customized

Redundant Manipulators” in proc. 2nd International and 17th National Conference on Machines and Mechanisms (iNaCoMM 2015), Indian Institute of Technology Kanpur, December 15, 2015.

 

6) G. Raju, H. Singh, P. Sarkar, E. Singla, “A Framework for Evaluation of Environmental

Sustainability in Pharmaceutical Industry” in proc. 28th International Conference on CADCAM, Robotics and Factories of the Future 2016, pp. 797-806, Kolaghat, West Bengal, January 6-8, 2016.

 

7) H. Bedi, S. Padhee and P. K. Agnihotri, “Effect of carbon nanotube grafting on the wetting behavior of carbon fiber” in proc. MatCon 2016, Smart Materials and Systems and Nanomaterials, January 14-16, 2016.

 

8) R. K. Maurya, “Investigation of Deterministic and Random Cyclic Patterns in a Diesel Engine using Symbol Sequence Analysis” in proc. 9th International Conference on ‘Advanced Computing and Communication Technologies' ICACCT™-2015, Panipat India, November 27-29 , 2015.

 

9) R. K. Maurya and P.Mishra , “Computational Analysis of Emissions from Gasoline HCCI Engine Using Stochastic Reactor Model” in proc. International Conference on Computing in Mechanical Engineering (ICCME’15), Kochi, Kerala, India, August 10-13, 2015.

 

10) R. K. Maurya, M. R. Saxena, N. Akhil, “Experimental Investigation of Cyclic Variation in a Diesel Engine Using Wavelets” International Symposium on Intelligent Systems Technologies and Applications (ISTA’15), Kochi, Kerala, India, August 10-13, 2015.

 

11) R.K. Singla and R. Das, "Adomian Decomposition Method for a Stepped Fin Space Radiator with Internal Heat Generation" in Proc. 2nd Int. Conf.on Recent Advances in Engineering and Computational Sciences (RAECS-2015), pp. 1-6, University Institute of Engineering and Technology, Panjab University, Chandigarh, India, 2015.

 

12) R. Das, “Predicting Dimensions of a Rectangular Fin Satisfying a Given Internal Heat Generation using Inverse Method” in Proc. ASME-2015: Gas Turbine India Conference, Hyderabad International Convention Center, Hyderabad, India (2015).

 

13) R. Das, “Inverse Prediction of Tilt Angle of a Building-Integrated Solar Collector using Golden Section Search Method” in Proc. 9th Int. Conf. on Innovative Research in Civil Engineering, Architecture and Environmental Engineering for Sustainable Development, pp. 1989-1993, J.N.U., New Delhi, India, 2015.

 

14) S. Gupta, E. Singla, “Initial Population Generation Strategy for Evolution of Planar Hybrid Manipulators” in proc. Advances in Robotics (AIR-2015), 2nd Int. Conf. of Robotics Society of India, Bits Goa, July 2-5, 2015.

 

15) R. Das and D.K. Prasad, "Application of Hybrid Optimization Algorithm for Solving Inverse Problem in Cylindrical Fin" in Proc. 7th Int. Conf. on Computational Intelligence, Modelling and Simulation (CIMSim 2015), pp. 38-41, Kuantan, Malaysia, 2015.

 

16) S. Gupta, E. Singla, and B. Dasgupta, “Population generation and validation for the task-based morphology evolution of robotic manipulators” 2nd international and 17th National Conference on Machines and Mechanisms (iNaCoMM-2015), Indian Institute of Technology Kanpur, India, December 16 - 19, 2015.

 

17) S. Gupta, E. Singla, “Initial Population Generation Strategy for Evolution of Planar Hybrid Manipulators” in proc. Advances in Robotics (AIR-2015), 2nd Int. Conf. of Robotics Society of India, Bits Goa, July 2-5, 2015.

 

18) S. Panda and R. Das, "Inverse Analysis of a Radial Porous Fin using Genetic Algorithm" in Proc. 8^th Int. Conf. on Contemporary Computing (IC3- 2015), pp. 167 – 170, Jaypee Institute of Information Technology, Noida, India, 2015.

 

19) S. Singh and E. Singla, “Development of reconfigurable serial manipulators using parameters based modules” in proc. 2nd International and 17th National Conference on Machines and Mechanisms (iNaCoMM 2015), Indian Institute of Technology Kanpur, December 16 - 19, 2015.

 

20) S. Singh, A. Kaplish and E. Singla, “Modular Robotic Assistance in Cluttered Environments: A Broad-Spectrum of Industrial Applications” in proc. 28th International Conference on CADCAM,Robotics and Factories of the Future 2016, Kolaghat, January 6 - 8, 2016.

 

21) S. Soni, H. Tyagi, and A. Kumar, “Analysis of Thermal Damage During the Nanoparticle-Assisted Thermal Therapy” in proc. 23rd National Heat and Mass Transfer Conference and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference, Thiruvananthapuram, Kerala, India, December 17 - 20, 2015.

 

22) S. Soni, H. Tyagi, R. A. Taylor and A. Kumar, “Effect of Nanoparticle Concentration on Thermal Damage In Nanoparticle-Assisted Thermal Therapy” in proc. ASME 2016 5th International Conference on Micro/Nanoscale Heat and Mass Transfer, Biopolis, Singapore, January 4 - 6, 2016.

 

23) V. Mehandia, E .́ Fodor, N. S. Gov , P. Visco, F.van Wijland, and D. Riveline, “Active Fluctuations in Epithelial Cell – Cell Junction” in proc. Indo-UK conference, Chail, Himachal Pradesh, India, May23 - 28, 2015.