Publication of Department of Mechanical, Material & Energy annual year 2014-15

School of Mechanical, Material & Energy Engineering

Book chapters

1. R. Das “Application of simulated annealing for inverse analysis of a single-glazed solar collector” Advances in Intelligent Informatics, Vol. 320, pp. 267-275, Springer, Heidelberg, 2015.

Patent

1. K. K. Kar, P. Agnihotri and S. Dasgupta, “CNT coated long fiber and process and preparation thereof ”, Indian Patent No. 260562, Issued on May 8, 2014.

Journals

1. A. K. Tiwari, A. R. Patel, and N. Kumar, “Investigation of strain rate on residual stress distribution,” Mater. Des., vol. 65, pp. 1041–1047, 2015.

2. D. K. Goyal, H. Singh, H. Kumar, and V. Sahni, “Erosive wear study of HVOF spray Cr 3 C 2 –NiCr coated CA6NM turbine steel,” J. Tribol., vol. 136, no. 4, p. 041602, 2014.

3. G. Goyal, N. Bala, H. Singh, and S. Prakash, “Role of superficially applied SnO2 inhibitor in Controlling high temperature corrosion of some Fe-, Co- and Ni-Base superalloys,” Oxid. Met., vol. 82, no. 1–2, pp. 49–69, 2014.

4. G. S. Goindi, S. N. Chavan, D. Mandal, P. Sarkar, and A. D. Jayal, “Investigation of Ionic Liquids as Novel Metalworking Fluids during Minimum Quantity Lubrication machining of a plain carbon steel,” Procedia CIRP, vol. 26, pp. 341–345, 2015.

5. H. S. Grewal, H. S. Arora, H. Singh, A. Agrawal, and S. Mukherjee, “Improving erosion resistance of hydro turbine steel using friction stir processing,” J. Tribol., vol. 136, no. 4, p. 041102, 2014.

6. H. S. Arora, S. Mridha, H. S. Grewal, H. Singh, D. C. Hofmann, and S. Mukherjee, “Controlling the length scale and distribution of the ductile phase in metallic glass composites through friction stir processing,” Sci. Technol. Adv. Mater., vol. 15, no. 3, p. 035011, 2014.

7. H. S. Arora, H. S. Grewal, M. Veligatla, H. Singh, and S. Mukherjee, “Microwave assisted in situ composite coating using metallic glass precursor,” Surf. Eng., vol. 30, no. 11, pp. 779–783, 2014.

8. H. S. Arora, H. S. Grewal, S. Mridha, H. Singh, and S. Mukherjee, “Structural changes in amorphous metals from high-strain plastic deformation,” Mater. Sci. Eng. A, vol. 617, pp. 175–178, 2014.

9. H. S. Grewal, H. Singh, and A. Agrawal, “A phenomenological model for slurry erosion prediction of thermal spray coatings,” Tribol. Lett., vol. 56, no. 1, pp. 119–132, 2014.

10. K. Saini and N. Kumar, “Effect of surface crack and its size on mechanical characteristics of gold nano-wires,” Procedia Mater. Sci., vol. 6, pp. 161–170, 2014.

11. N. Bala, H. Singh, J. Karthikeyan, and S. Prakash, “Cold spray coating process for corrosion protection: a review,” Surf. Eng., vol. 30, no. 6, pp. 414–421, 2014.


12. N. Kaur, M. Kumar, S. K. Sharma, D. Y. Kim, S. Kumar, N. M. Chavan, S. V. Joshi, N. Singh, and H. Singh, “Study of mechanical properties and high temperature oxidation behavior of a novel cold- spray Ni-20Cr coating on boiler steels,” Appl. Surf. Sci., vol. 328, pp. 13–25, 2015.


13. P. Sarkar and A. Chakrabarti, “Ideas generated in conceptual design and their effects on creativity,” Res. Eng. Des., vol. 25, no. 3, pp. 185–201, 2014.


14. P. Sarkar, B. Sharma, and U. Malik, “Energy generation from grey water in high raised buildings: The case of India,” Renew. Energy, vol. 69, pp. 284–289, 2014.


15. P. K. Agnihotri and E. Van der Giessen, “On the rate sensitivity in discrete dislocation plasticity,” Mech. Mater., 2015.


16. R. K. Maurya and A. K. Agarwal, “Experimental investigations of particulate size and number distribution in an ethanol and methanol fueled HCCI engine,” J. Energy Resour. Technol., vol. 137, no. 1, p. 012201, 2014.


17. R. S. Joshi and H. Singh, “Characteristic studies of brass particulates fabricated by modulation assisted machining,” Int. J. Adv. Manuf. Technol., vol. 73, no. 9–12, pp. 1533–1542, 2014.


18. R. K. Singla and R. Das, “Adomian decomposition method for a stepped fin with all temperature- dependent modes of heat transfer,” Int. J. Heat Mass Transf., vol. 82, pp. 447–459, 2015.


19. R. Das, “Forward and inverse solutions of a conductive, convective and radiative cylindrical porous fin,” Energy Convers. Manag., vol. 87, pp. 96–106, 2014.


20. R. K. Maurya and A. K. Agarwal, “Particulate morphology and toxicity of an alcohol fuelled HCCI engine,” SAE Int. J. Fuels Lubr., vol. 7, no. 1, pp. 323–336, 2014.


21. R. K. Maurya and A. K. Agarwal, “Effect of intake air temperature and air-fuel ratio on particulates in gasoline and n-butanol fueled homogeneous charge compression ignition engine,” Int. J. Engine Res., vol. 15, no. 7, pp. 789–804, 2014.

22. R. K. Maurya and A. K. Agarwal, “Experimental investigations of performance, combustion and emission characteristics of ethanol and methanol fueled HCCI engine,” Fuel Process. Technol., vol. 126, pp. 30–48, 2014.


23. R. K. Maurya, and A. K. Agarwal, “Combustion and emission characterization of n-butanol

fuelled HCCI engine”, Journal of Energy Resources Technology- Transactions of The ASME, Volume 137, Issue 1, 2015.


24. R. K. Singla and R. Das, “Application of decomposition method and inverse prediction of parameters in a moving fin,” Energy Convers. Manag., vol. 84, pp. 268–281, 2014


25. S. Soni, H. Tyagi, R. A. Taylor, and A. Kumar, “Investigation on nanoparticle distribution for thermal ablation of a tumour subjected to nanoparticle assisted thermal therapy.,” J. Therm. Biol., vol. 43, pp. 70–80, 2014.


26. S. Sharma, R. Chandra, P. Kumar, and N. Kumar, “Effect of Stone–Wales and vacancy defects on elastic moduli of carbon nanotubes and their composites using molecular dynamics simulation,” Comput. Mater. Sci., vol. 86, pp. 1–8, 2014.


27. S. Singh, A.Kumar, and N.Kumar,“Motor current signature analysis for bearing fault detection in mechanical systems,” Procedia Mater. Sci., vol. 6, pp. 171–177, 2014.


28. S. Singh and N. Kumar, “Combined rotor fault diagnosis in rotating machinery using empirical mode decomposition,” J. Mech. Sci. Technol., vol. 28, no. 12, pp. 4869–4876, 2014.


29. S. Panda, R. K. Singla, R. Das, and S. C. Martha, “Identification of design parameters in a solar collector using inverse heat transfer analysis,” Energy Convers. Manag., vol. 88, pp. 27–39, Dec. 2014.


30. T. P. Otanicar, S. Theisen, T. Norman, H. Tyagi, and R. A. Taylor, “Envisioning advanced solarelectricity generation: Parametric studies of CPV/T systems with spectral filtering and high temperature PV,” Appl. Energy, vol. 140, pp. 224–233, 2015.


31. T. P. Singh, H. Singh, and H. Singh, “Characterization of thermal sprayed hydroxyapatite coatings on some biomedical implant materials.,” J. Appl. Biomater. Funct. Mater., vol. 12, no. 1, pp. 48–56, 2014.


32. T. K. Gogoi, M. Pandey, and R. Das, “Estimation of operating parameters of a reheat regenerative power cycle using simplex search and differential evolution based inverse methods,” Energy Convers. Manag., vol. 91, pp. 204–218, 2015.


33. V. Khullar, H. Tyagi, N. Hordy, T. P. Otanicar, Y. Hewakuruppu, P. Modi, and R. A. Taylor, “Harvesting solar thermal energy through nanofluid-based volumetric absorption systems,” Int. J. Heat Mass Transf., vol. 77, pp. 377–384, 2014.


34. A. Bhowmik, R.K. Singla, R. Das, A. Mallick, and R. Repaka, “Inverse modeling of a solar collector involving Fourier and non-Fourier heat conduction,” Appl. Math. Model.., vol. 38, pp. 5126–5148, 2014.

Conference proceedings

1. A. Singh, and A. Agrawal, “Comparison of dimensional repeatability and accuracy for deformation machining stretching mode with sheet metal components” in proc. 5th International and 26th All India Manufacturing Technology, Design and Research Conference AIMTDR 2014, IIT Guwahati, Guwahati, India, December 12-14, 2014.

2. A. Singh, and A. Agrawal “comparison of deforming forces for deformation machined components with conventionally formed components” in proc. 23rd International Conference on processing and fabrication of advanced materials, IIT Roorkee, Roorkee, India, December 5- 7, 2014.

3. A. R Patel, P. Sarkar, H. Singh , H. Tyagi, and S. Sagi, “Emission discounting method for mitigation of environmental issues” in Proc. Fist IEEE Uttar Pradesh Conference-International Conference on Energy Economics and Environment (UPCON-ICEEE 2015), Greater Noida, India, March 27- 28, 2015.

4. B. Kaur, P. K. Agnihotri, and N. Singh, “Development of dipodal electrochemical sensor for selective recognition of PO3−4 using organic nanoparticles in an aqueous medium”, in Proc. Prof. R.C. Paul national symposium, Punjab University, Chandigarh, India, March 20-21, 2015.

5. D.K. Mahajan,”Crystal plasticity based modeling of fatigue behaviour of metals under hydrogen environment” in Proc. of Multiscale Modeling of Materials and Devices (MMMD-2014), BARC, Mumbai, pp. 103, October 2014.

6. G. S. Goindi, S. N. Chavan, A. D. Jayal, D. Mandal and P. Sarkar , “Investigation of ionic liquids as metalworking fluids in minimum quantity lubrication machining of AISI 1045 steel” in Proc. 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), Guwahati, December 12-14, 2014.

7. P. Sarkar and B. Kumar, “Identifying tools for remotely located collaborative interactions" Proc. of International Conference on Recent Advances in Engineering and Computational Sciences” in proc. IEEE sponsored RAECS, UIET Panjab University Chandigarh, March 6-8 2014.

8. P. K. Agnihotri, and E. V. Giessen, “Rate Sensitivity of Metals: Insights from Discrete Dislocation Plasticity”, in Proc. of MMMD-2014, BARC, Mumbai, pp. 138, October 30 – November 2, 2014.

9. P. Sarkar, S. Kota, B. Kumar, “Understanding consumers’ perceptions of sustainable products in India” in Proc. International Conference on Research in Design, ICORD 2015, Bangalore, India, January 7-9, 2015.


10. R. P. Amit, P. Sarkar, H. Singh, H. Tyagi and S. Sudhakar, “Life cycle assessment of intermediate Pyrolysis of wheat straw for sustainable energy alternate and emission mitigation” in proc. International conference on Innovative Trends in Mechanical, Materials, Manufacturing, Automotive, Automobile and Aeronautical Engineering (ITMMMAAAE)- 2014, New Delhi, February 15-16, 2014.

11. R.Das, “Application of simulate dannealingfor solving inverse problem in a radiative porousfin, 2nd National Conference on Advances in Simulation & Experimental Techniques” in proc. At Mechanical Engineering (NCASEme), Chandigarh University, Mohali, Punjab, India, March 23- 24, 2015.

12. R. Das, “Inverse prediction of critical dimensions of a ceramic fin using simulated annealing, International Conference on Alumina and other Functional Ceramics (AOFC-2015)” CSIR- Central Glass & Ceramic Research Institute (CGCRI), Jadavpur, Kolkata, India, March 11-13, 2015.

13. R. Das and R.K. Singla, “Inverse heat transfer study of a nonlinear straight porous fin using hybrid optimization” ASME-2014: Gas Turbine India Conference, India Habitat Center, New Delhi, India, December 15-17, 2014.

14. R. Das, “Application of simulated annealing for inverse analysis of a single-glazed solar collector, 3rd International Symposium on Intelligent Informatics (ISI-14)” Galgotias College of Engineering & Technology, Greater Noida, September 24-27, 2014.

15. R. Das, “Inverse study of double-glazed solar collector using hybrid evolutionary algorithm, 7th International Conference on Contemporary Computing (IC3:2014)” Jaypee Institute of Information Technology, Noida, India, August 7-9, 2014.

16. S. B. Dhage, A.D. Jayal and P. Sarkar, “Investigation of surface textured cutting tools for sustainable machining” in Proc. 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), Guwahati, December 12-14, 2014.

17. S. Gupta, P. Sarkar and E. Singla, “Understanding various stakeholders of sustainable product and service based systems for sustainable manufacturing using GA” in Proc. 5th International & 26th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014), Guwahati, December 12-14, 2014.